RUKO HSS HAND TAP FOR M6 X 1.0 THREADED PARTS, CAN BE USED FOR M6X1.0 BOSSES , OR ANY OTHER ITEMS THAT NEEDS M6X1.0 THREAD TAPPED OR CLEANED.
For through threads in unalloyed or low-alloyed steels up to 800 N/mm² strength, malleable cast iron and non-ferrous metals. The thread can be cut in one operation by hand or machine.
Nominal thread size M5
Pitch mm 0.08MM
Thread length 13MM
Thread core hole 4.20
Total length 50MM
Chamfer: Type B, 4 - 5 threads with progressive tap Thread: metric, DIN ISO 13
Flanks: relief-ground Tolerance: ISO 2 / 6H Surface: bright Right-hand cutting
SKU - CUT-HT-RUKO-231050
RUKO HSS HAND TAP FOR M6 X 1.0 THREADED PARTS, CAN BE USED FOR M6X1.0 BOSSES , OR ANY OTHER ITEMS THAT NEEDS M6X1.0 THREAD TAPPED OR CLEANED.
For through threads in unalloyed or low-alloyed steels up to 800 N/mm² strength, malleable cast iron and non-ferrous metals. The thread can be cut in one operation by hand or machine.
Nominal thread size M5
Pitch mm 0.08MM
Thread length 13MM
Thread core hole 4.20
Total length 50MM
Chamfer: Type B, 4 - 5 threads with progressive tap Thread: metric, DIN ISO 13
Flanks: relief-ground Tolerance: ISO 2 / 6H Surface: bright Right-hand cutting
SKU - CUT-HT-RUKO-231050
