THIS PAIR OF C60UDH REAR DROPOUTS IS CNC MACHINED IN HOUSE AT BFS. THESE DROPOUTS ARE A MODULAR SYSTEM THAT USES TWO 7005 ALUMINUM FLANGES WITH 6061 ALUMINUM INSERTS THAT ARE BOLTED ON. THEY ARE A VERY VERSATILE DROPOUT AND CAN WORK WITH A VARIETY OF BIKE FRAME DESIGNS. WE HAVE HAD CUSTOMERS USE THEM FROM ROAD TO FULL SUSPENSION BIKE FRAMES.
FLANGES :
MACHINED FROM 7005 ALUMINUM FOR TIG WELDING TO 7005 TUBING
FLANGE WIDTH IS 20MM WIDE ALLOWING GOOD PLACEMENT OF CHAIN OR SEAT STAY TIPS WITH TAPERED ENDS
FLANGES HAVE A 10MM RADIUS AND WILL ALLOW FOR MANY STAY ANGLES , FOR USE ON SMALL TO LARGE SIZED BIKE FRAMES.
YOU CAN USE ISO /POST MOUNT / AND FLAT MOUNT DISK BRAKE TABS WITH THESE DROPOUTS
INSERTS:
ALUMINUM INSERTS ARE MACHINED FROM 6061 ALUMINUM AND ANODIZED BLACK- THE INSERTS USE A 12 x 1.0 MM THRU-AXLE. . THESE DROPUTS ARE TO USE A UDH HANGER WHICH IS BOUGHT SEPERATELY . WITH THE CORRECT AXLE LENGTH THE DROPOUTS CAN BE USED WITH A VARIETY OF HUB SPACING.
THESE DROPOUTS CAN BE USE FOR HUB WIDTHS OF 142/148/157/197
USE BFS AXLE :TA-BFS-12B-168-1.0-15 FOR 142 HUB SPACING
TA-BFS-12B-174-1.0-15 FOR 148 HUB SPACING BOOST
THESE DROP OUTS CAN BE USED FOR MTB/FAT/GRAVEL/CYCLOCROSS/ROAD FRAMESEST WEIGHT -
135g WITH BOLTS
SKU- FRMA-DOR-C60UDH-12X1..0-B-WF
THIS PAIR OF C60UDH REAR DROPOUTS IS CNC MACHINED IN HOUSE AT BFS. THESE DROPOUTS ARE A MODULAR SYSTEM THAT USES TWO 7005 ALUMINUM FLANGES WITH 6061 ALUMINUM INSERTS THAT ARE BOLTED ON. THEY ARE A VERY VERSATILE DROPOUT AND CAN WORK WITH A VARIETY OF BIKE FRAME DESIGNS. WE HAVE HAD CUSTOMERS USE THEM FROM ROAD TO FULL SUSPENSION BIKE FRAMES.
FLANGES :
MACHINED FROM 7005 ALUMINUM FOR TIG WELDING TO 7005 TUBING
FLANGE WIDTH IS 20MM WIDE ALLOWING GOOD PLACEMENT OF CHAIN OR SEAT STAY TIPS WITH TAPERED ENDS
FLANGES HAVE A 10MM RADIUS AND WILL ALLOW FOR MANY STAY ANGLES , FOR USE ON SMALL TO LARGE SIZED BIKE FRAMES.
YOU CAN USE ISO /POST MOUNT / AND FLAT MOUNT DISK BRAKE TABS WITH THESE DROPOUTS
INSERTS:
ALUMINUM INSERTS ARE MACHINED FROM 6061 ALUMINUM AND ANODIZED BLACK- THE INSERTS USE A 12 x 1.0 MM THRU-AXLE. . THESE DROPUTS ARE TO USE A UDH HANGER WHICH IS BOUGHT SEPERATELY . WITH THE CORRECT AXLE LENGTH THE DROPOUTS CAN BE USED WITH A VARIETY OF HUB SPACING.
THESE DROPOUTS CAN BE USE FOR HUB WIDTHS OF 142/148/157/197
USE BFS AXLE :TA-BFS-12B-168-1.0-15 FOR 142 HUB SPACING
TA-BFS-12B-174-1.0-15 FOR 148 HUB SPACING BOOST
THESE DROP OUTS CAN BE USED FOR MTB/FAT/GRAVEL/CYCLOCROSS/ROAD FRAMESEST WEIGHT -
135g WITH BOLTS
SKU- FRMA-DOR-C60UDH-12X1..0-B-WF
