JBYPM3019 PLATE YOKE KIT -MTB - 29X2.6/27.5X2.8 TIRE - FOR 19MM STAYS - ANY BB SHELL
PART OF THE JB SERIES OF YOKES- THIS PLATE YOKE KIT FOR YOUR NEXT BUILD. ITS INTENDED FOR MTB FRAMES , BUT CAN BE USED FOR A VARIETY OF BUILD , DIRT JUMPS , KLUNK/CRUISERS , STREET/DIRT BMX.
THE KIT CAN BE TIG WELDED OR FILLET BRAZED. TIG WELDING WILL REQUIRE USE OF ER 312 OR COMBO OF ER70S2 ON THE 4130 PLATE PORTION AND ER312 FOR THE 3D PRINTED STAINLESS YOKE TO STAY PLUG. FOR FILLET BRAZING SHOULD USE C-O4 OR GF 72 ON THE 4130 PLATE AND 38-45% SILVER ON THE STAINLESS YOKE PLUG .
KIT CONTAIN:
2EA 3/16 4130 YOKE PLATES BENT AT 30° +/-.5°
1EA 1/8" 4130 YOKE BRIDGE
2EA 3D PRINTED 316L YOKE PLATE TO 19MM ROUND STAY PLUGS
STAY PLUGS TO FIT 19MM X .9 TUBING - USE SINGLE OR DOUBLE BEND STAYS AS NEEDED
BASED ON 73MM X 38MM BB SHELL
TIRE AND CHAINSTAY + 29 X 2.6" @ 415mm + 29 X 2.8" @ 420mm + 27.5 X 2.8" @ 400mm
CHAINRING + 52mm CHAINLINE MIN.* DEISGNED FOR DIRECT MOUNT CHIANRINGS+ 34 TOOTH MAX.
CRANKSET + 162mm Q FACTOR MIN.
NOTE: BECAUSE OF MATERIAL, LASER,3D PRINTING TOLERANCES , IT MAY REQUIRE A LITTLE MATERIAL REMOVAL. OF PARTS . AS THEY CAN BE ON THE TIGHTER SIDE OF FITMENT
THIS YOKE CAN BE TEAMED UP WITH CUSTOM 19MM BEND CHAIN STAYS CLICK HERE
WEIGHT: 170 GRAMS
SKU: FRM-JBYPM3019-KIT
PART OF THE JB SERIES OF YOKES- THIS PLATE YOKE KIT FOR YOUR NEXT BUILD. ITS INTENDED FOR MTB FRAMES , BUT CAN BE USED FOR A VARIETY OF BUILD , DIRT JUMPS , KLUNK/CRUISERS , STREET/DIRT BMX.
THE KIT CAN BE TIG WELDED OR FILLET BRAZED. TIG WELDING WILL REQUIRE USE OF ER 312 OR COMBO OF ER70S2 ON THE 4130 PLATE PORTION AND ER312 FOR THE 3D PRINTED STAINLESS YOKE TO STAY PLUG. FOR FILLET BRAZING SHOULD USE C-O4 OR GF 72 ON THE 4130 PLATE AND 38-45% SILVER ON THE STAINLESS YOKE PLUG .
KIT CONTAIN:
2EA 3/16 4130 YOKE PLATES BENT AT 30° +/-.5°
1EA 1/8" 4130 YOKE BRIDGE
2EA 3D PRINTED 316L YOKE PLATE TO 19MM ROUND STAY PLUGS
STAY PLUGS TO FIT 19MM X .9 TUBING - USE SINGLE OR DOUBLE BEND STAYS AS NEEDED
BASED ON 73MM X 38MM BB SHELL
TIRE AND CHAINSTAY + 29 X 2.6" @ 415mm + 29 X 2.8" @ 420mm + 27.5 X 2.8" @ 400mm
CHAINRING + 52mm CHAINLINE MIN.* DEISGNED FOR DIRECT MOUNT CHIANRINGS+ 34 TOOTH MAX.
CRANKSET + 162mm Q FACTOR MIN.
NOTE: BECAUSE OF MATERIAL, LASER,3D PRINTING TOLERANCES , IT MAY REQUIRE A LITTLE MATERIAL REMOVAL. OF PARTS . AS THEY CAN BE ON THE TIGHTER SIDE OF FITMENT
THIS YOKE CAN BE TEAMED UP WITH CUSTOM 19MM BEND CHAIN STAYS CLICK HERE
WEIGHT: 170 GRAMS
SKU: FRM-JBYPM3019-KIT
PART OF THE JB SERIES OF YOKES- THIS PLATE YOKE KIT FOR YOUR NEXT BUILD. ITS INTENDED FOR MTB FRAMES , BUT CAN BE USED FOR A VARIETY OF BUILD , DIRT JUMPS , KLUNK/CRUISERS , STREET/DIRT BMX.
THE KIT CAN BE TIG WELDED OR FILLET BRAZED. TIG WELDING WILL REQUIRE USE OF ER 312 OR COMBO OF ER70S2 ON THE 4130 PLATE PORTION AND ER312 FOR THE 3D PRINTED STAINLESS YOKE TO STAY PLUG. FOR FILLET BRAZING SHOULD USE C-O4 OR GF 72 ON THE 4130 PLATE AND 38-45% SILVER ON THE STAINLESS YOKE PLUG .
KIT CONTAIN:
2EA 3/16 4130 YOKE PLATES BENT AT 30° +/-.5°
1EA 1/8" 4130 YOKE BRIDGE
2EA 3D PRINTED 316L YOKE PLATE TO 19MM ROUND STAY PLUGS
STAY PLUGS TO FIT 19MM X .9 TUBING - USE SINGLE OR DOUBLE BEND STAYS AS NEEDED
BASED ON 73MM X 38MM BB SHELL
TIRE AND CHAINSTAY + 29 X 2.6" @ 415mm + 29 X 2.8" @ 420mm + 27.5 X 2.8" @ 400mm
CHAINRING + 52mm CHAINLINE MIN.* DEISGNED FOR DIRECT MOUNT CHIANRINGS+ 34 TOOTH MAX.
CRANKSET + 162mm Q FACTOR MIN.
NOTE: BECAUSE OF MATERIAL, LASER,3D PRINTING TOLERANCES , IT MAY REQUIRE A LITTLE MATERIAL REMOVAL. OF PARTS . AS THEY CAN BE ON THE TIGHTER SIDE OF FITMENT
THIS YOKE CAN BE TEAMED UP WITH CUSTOM 19MM BEND CHAIN STAYS CLICK HERE
WEIGHT: 170 GRAMS
SKU: FRM-JBYPM3019-KIT
