JBYPM3022 PLATE YOKE KIT -MTB - 29X2.6/27.5X2.8 TIRE - FOR 22.2MM STAYS - ANY BB SHELL
PART OF THE JB SERIES OF YOKES- THIS PLATE YOKE KIT FOR YOUR NEXT BUILD. ITS INTENDED FOR MTB FRAMES , BUT CAN BE USED FOR A VARIETY OF BUILD , DIRT JUMPS , KLUNK/CRUISERS , STREET/DIRT BMX.
THE KIT CAN BE TIG WELDED OR FILLET BRAZED. TIG WELDING WILL REQUIRE USE OF ER 312 OR COMBO OF ER70S2 ON THE 4130 PLATE PORTION AND ER312 FOR THE 3D PRINTED STAINLESS YOKE TO STAY PLUG. FOR FILLET BRAZING SHOULD USE C-O4 OR GF 72 ON THE 4130 PLATE AND 38-45% SILVER ON THE STAINLESS YOKE PLUG .
THIS YOKE IS AVAILABLE ON BIKECAD VERSION 21.0 IN THE 19MM VERSION
KIT CONTAIN:
2EA 3/16 4130 YOKE PLATES BENT AT 30° +/-.5°
1EA 1/8" 4130 YOKE BRIDGE
2EA 3D PRINTED 316L YOKE PLATE TO 22.2MM ROUND STAY PLUGS
STAY PLUGS TO FIT 22.2MM X .9 TUBING - USE SINGLE OR DOUBLE BEND STAYS AS NEEDED
BASED ON 73MM X 38MM BB SHELL , BUT POSSIBLE TO USE ON 83MM , T47- 73MM , 91.5MM , AMERICAN BB SHELLS , AND MID BB SHELLS. ALWAY VERIFY CHAIN RING CLEARANCES.
TIRE AND CHAINSTAY + 29 X 2.6" @ 415mm + 29 X 2.8" @ 420mm + 27.5 X 2.8" @ 400mm
CHAINRING + 52mm CHAINLINE MIN.* DEISGNED FOR DIRECT MOUNT CHIANRINGS+ 34 TOOTH MAX. PLEASE ALWAYS CHECK PHYSICAL FITMENT OF CRANK/CHAINRING INTERFACE TO YOKE AS BEST PRACTICE TO CONFIRM FITMENT FROM CERTAIN MANUFACTURES.
CRANKSET + 162mm Q FACTOR MINIMUM
NOTE: BECAUSE OF MATERIAL, LASER,3D PRINTING TOLERANCES , IT MAY REQUIRE A LITTLE MATERIAL REMOVAL. OF PARTS . AS THEY CAN BE ON THE TIGHTER SIDE OF FITMENT
WEIGHT: 200 GRAMS
SKU: FRM-JBYPM3022-KIT
PART OF THE JB SERIES OF YOKES- THIS PLATE YOKE KIT FOR YOUR NEXT BUILD. ITS INTENDED FOR MTB FRAMES , BUT CAN BE USED FOR A VARIETY OF BUILD , DIRT JUMPS , KLUNK/CRUISERS , STREET/DIRT BMX.
THE KIT CAN BE TIG WELDED OR FILLET BRAZED. TIG WELDING WILL REQUIRE USE OF ER 312 OR COMBO OF ER70S2 ON THE 4130 PLATE PORTION AND ER312 FOR THE 3D PRINTED STAINLESS YOKE TO STAY PLUG. FOR FILLET BRAZING SHOULD USE C-O4 OR GF 72 ON THE 4130 PLATE AND 38-45% SILVER ON THE STAINLESS YOKE PLUG .
THIS YOKE IS AVAILABLE ON BIKECAD VERSION 21.0 IN THE 19MM VERSION
KIT CONTAIN:
2EA 3/16 4130 YOKE PLATES BENT AT 30° +/-.5°
1EA 1/8" 4130 YOKE BRIDGE
2EA 3D PRINTED 316L YOKE PLATE TO 22.2MM ROUND STAY PLUGS
STAY PLUGS TO FIT 22.2MM X .9 TUBING - USE SINGLE OR DOUBLE BEND STAYS AS NEEDED
BASED ON 73MM X 38MM BB SHELL , BUT POSSIBLE TO USE ON 83MM , T47- 73MM , 91.5MM , AMERICAN BB SHELLS , AND MID BB SHELLS. ALWAY VERIFY CHAIN RING CLEARANCES.
TIRE AND CHAINSTAY + 29 X 2.6" @ 415mm + 29 X 2.8" @ 420mm + 27.5 X 2.8" @ 400mm
CHAINRING + 52mm CHAINLINE MIN.* DEISGNED FOR DIRECT MOUNT CHIANRINGS+ 34 TOOTH MAX. PLEASE ALWAYS CHECK PHYSICAL FITMENT OF CRANK/CHAINRING INTERFACE TO YOKE AS BEST PRACTICE TO CONFIRM FITMENT FROM CERTAIN MANUFACTURES.
CRANKSET + 162mm Q FACTOR MINIMUM
NOTE: BECAUSE OF MATERIAL, LASER,3D PRINTING TOLERANCES , IT MAY REQUIRE A LITTLE MATERIAL REMOVAL. OF PARTS . AS THEY CAN BE ON THE TIGHTER SIDE OF FITMENT
WEIGHT: 200 GRAMS
SKU: FRM-JBYPM3022-KIT
PART OF THE JB SERIES OF YOKES- THIS PLATE YOKE KIT FOR YOUR NEXT BUILD. ITS INTENDED FOR MTB FRAMES , BUT CAN BE USED FOR A VARIETY OF BUILD , DIRT JUMPS , KLUNK/CRUISERS , STREET/DIRT BMX.
THE KIT CAN BE TIG WELDED OR FILLET BRAZED. TIG WELDING WILL REQUIRE USE OF ER 312 OR COMBO OF ER70S2 ON THE 4130 PLATE PORTION AND ER312 FOR THE 3D PRINTED STAINLESS YOKE TO STAY PLUG. FOR FILLET BRAZING SHOULD USE C-O4 OR GF 72 ON THE 4130 PLATE AND 38-45% SILVER ON THE STAINLESS YOKE PLUG .
THIS YOKE IS AVAILABLE ON BIKECAD VERSION 21.0 IN THE 19MM VERSION
KIT CONTAIN:
2EA 3/16 4130 YOKE PLATES BENT AT 30° +/-.5°
1EA 1/8" 4130 YOKE BRIDGE
2EA 3D PRINTED 316L YOKE PLATE TO 22.2MM ROUND STAY PLUGS
STAY PLUGS TO FIT 22.2MM X .9 TUBING - USE SINGLE OR DOUBLE BEND STAYS AS NEEDED
BASED ON 73MM X 38MM BB SHELL , BUT POSSIBLE TO USE ON 83MM , T47- 73MM , 91.5MM , AMERICAN BB SHELLS , AND MID BB SHELLS. ALWAY VERIFY CHAIN RING CLEARANCES.
TIRE AND CHAINSTAY + 29 X 2.6" @ 415mm + 29 X 2.8" @ 420mm + 27.5 X 2.8" @ 400mm
CHAINRING + 52mm CHAINLINE MIN.* DEISGNED FOR DIRECT MOUNT CHIANRINGS+ 34 TOOTH MAX. PLEASE ALWAYS CHECK PHYSICAL FITMENT OF CRANK/CHAINRING INTERFACE TO YOKE AS BEST PRACTICE TO CONFIRM FITMENT FROM CERTAIN MANUFACTURES.
CRANKSET + 162mm Q FACTOR MINIMUM
NOTE: BECAUSE OF MATERIAL, LASER,3D PRINTING TOLERANCES , IT MAY REQUIRE A LITTLE MATERIAL REMOVAL. OF PARTS . AS THEY CAN BE ON THE TIGHTER SIDE OF FITMENT
WEIGHT: 200 GRAMS
SKU: FRM-JBYPM3022-KIT
